Posts for category: Dental Procedures
Advanced decay doesn't necessarily mean it's curtains for an infected tooth. Millions of teeth in that condition have been saved by a tried and true procedure called root canal therapy.
Although they may vary according to the complexity of a case, all root canal procedures share some similarities. After numbing the tooth and gum areas with local anesthesia, the procedure begins with a small hole drilled into the tooth to access the infected pulp and root canals, tiny passageways inside the root.
The dentist then uses special instruments to clear out infected tissue from the pulp and canals, followed by thoroughly sanitizing the resulting empty spaces. This is followed with filling the pulp chamber and root canals with a rubber-like substance (gutta percha) to seal the interior of the tooth from further infection. Later, the dentist typically crowns the tooth for further protection and support.
Root canals have become the standard treatment for teeth with advanced decay. There are, however, some circumstances where performing a root canal isn't a good idea. For example, a previously root-canaled tooth with a crown and supporting post. A dentist would need to fully disassemble the restoration to gain access into the tooth, which could significantly weaken it.
But there may be another option if a standard root canal is out of the picture: a surgical procedure performed by an endodontist (a specialist in interior tooth treatment) called an apicoectomy. Instead of drilling through the tooth crown, the endodontist accesses the tooth root through the adjacent gum tissue.
Like a traditional root canal, the procedure begins by anesthetizing the tooth and surrounding gums. The endodontist then makes a small incision through the gums to expose the diseased tissues at the tooth's root. After removing the infected tissue and a few millimeters of the root tip, they place a small filling to seal the end of the root canal against infection and suture the gum incision.
This is a specialized procedure that requires the state-of-the-art equipment and advanced techniques of an endodontist. But it does provide another possible option for saving a diseased tooth that might otherwise be lost.
If you would like more information on treatments for tooth decay, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Apicoectomy: A surgical Option When Root Canal Treatment Fails.”
Nina Parker, the host of Love & Hip Hop for six seasons, is now busy with the new game show Blockbusters and her own talk show The Nina Parker Show. But even with a full plate, she took time recently for some personal care—getting a new smile.
Parker's fans are familiar with her noticeable tooth gap. But a video on TikTok in February changed all that: In the video, she teasingly pulls away a mask she's wearing to reveal her smile—without the gap.
Parker and other celebrities like Madonna, Michael Strahan and David Letterman are not alone. Teeth gaps are a common smile feature, dating back millennia (even in fiction: Chaucer described the Wife of Bath as being "gap-toothed" in The Canterbury Tales).
So, what causes a tooth gap? Actually, a lot of possibilities. The muscle between the teeth (the frenum) may be overly large and pushing the teeth apart. There may be too much room on the jaw, so the teeth spread apart as they develop. It might also have resulted from tongue thrusting or late thumb sucking as a child, influencing the front teeth to develop forward and outward.
A tooth gap can be embarrassing because they're often front and center for all the world to see, but they can also cause oral health problems like complicating oral hygiene and increasing your risk for tooth decay. They can also contribute to misalignment of other teeth.
Fortunately, there are ways to alleviate a gap. One way is to move the teeth closer together with either braces or removable clear aligners. This may be the best approach if the gap is wide and it's contributing to misalignment of other teeth. You may also need surgery to alter the frenum.
You can also reduce less-pronounced gaps cosmetically with dental bonding or porcelain veneers. Bonding involves applying a type of resin material to the teeth on either side of the gap. After some sculpting to make it appear life-like, we harden the material with a curing light. The result is a durable, tooth-like appearance that closes the gap.
A veneer is a thin wafer of porcelain, custom-made to fit an individual patient's tooth. Bonded to the front of teeth, veneers mask various dental flaws like chips, deformed teeth, heavy staining and, yes, mild to moderate tooth gaps. They do require removing a small amount of enamel on the teeth they cover, but the results can be stunning—completely transformed teeth without the gap.
Getting rid of a tooth gap can be a wise move, both for your smile and your health. You may or may not take to social media to show it off like Nina Parker, but you can feel confident to show the world your new, perfect smile.
If you would like more information about treating teeth gaps and other dental flaws, please contact us or schedule a consultation. To learn more, read the Dear Doctor magazine article “Space Between Front Teeth.”
Dentists extract millions of teeth each year, mostly because of disease. But sometimes a healthy tooth is removed to gain a more favorable, long-term dental health outcome.
An example of this is extracting teeth for the sake of orthodontic treatment. This is often beneficial when treating bite problems caused by crowding, a condition in which not enough space on the jaw exists to accommodate all of the teeth coming in. When this happens, the limited space can force teeth out of their proper alignment.
Crowding also complicates correcting the bite problem with braces: As with the eruption phase, there's no available room for orthodontic movement. One solution that may arise after a detailed examination is to open up space on the jaw by removing some of the teeth.
Planning this kind of tooth extrication requires careful forethought with the end in mind—ultimately, the dental providers involved want the resulting appearance after braces to look as natural as possible. For that reason, dentists usually choose teeth for extraction that are outside of the "smile zone" (the teeth visible while smiling) like premolars and molars.
Additionally, dentists are concerned about bone loss after extracting the teeth. Bone often diminishes around empty tooth sockets, especially if those sockets were damaged during extraction. This loss in bone can weaken the jaw structure and cause significant problems while moving teeth with braces.
To avoid this, dentists take great care during tooth removal not to damage the socket. Additionally, they may place a bone graft within the socket immediately after removing the tooth, especially if the space will remain vacant for a significant period of time. A bone graft serves as a scaffold upon which new bone cells can form and accumulate.
After the extractions, the orthodontist may then proceed with correcting the bite. Patients may also need some form of prosthetic teeth to fill in the spaces while wearing braces. Often prosthetic teeth can be incorporated with the braces for a more natural look. After braces, any remaining gaps may require further restoration, either with dentures, bridges or, later in adulthood, dental implants.
Complex bite problems like crowding pose unique challenges in correcting them. But using techniques like tooth extraction can help achieve a successful and satisfactory outcome.
If you would like more information on treatments for bite problems, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Tooth Removal for Orthodontic Reasons.”
If you've decided on a dental implant to replace a missing tooth, you've made a great choice. Implants are a big favorite of both dentists and patients, not only for their life-likeness, but also their durability. Studies show that more than 95% of implants survive after ten years.
As you may know, single tooth implants are composed of two main parts: a metal post (usually titanium) imbedded in the jawbone; and a life-like crown affixed to the end of the post. But what you may not know is that there are two ways to attach the crown—either with screws or with dental cement.
Neither way is superior to the other—both have their own set of advantages and disadvantages. A cemented crown, for instance, usually looks more like a natural tooth than a screw-retained crown (more about that later) and dentists have more flexibility in making them look natural.
But cemented crowns require an additional piece of hardware called an abutment to better match it with the implant, something unnecessary with a screw-retained crown. Some people can also experience a reaction to the cement resulting in inflammation or even bone loss. And once installed, removing the crown later for repair or replacement is much more difficult than with a screw-retained crown.
Besides attaching directly to the implant, screw-retained crowns don't require cement and are more easily attached and removed. But the screw-hole can pose some aesthetic problems: Although it can be filled with a tooth-colored filling, the tooth's appearance isn't as ideal as a cemented crown.
So, which one is best for you? That will depend on the type and location of teeth being replaced, as well as your dentist's preferences. For instance, a more attractive cemented crown may be better for a visible front tooth, while a screw-retained crown might be a good choice for a back premolar or molar where appearance isn't as big a factor.
In the end, it's likely your dentist will discuss the pros and cons for each method as it pertains to your individual case. Whichever way your crown attaches, the end result will still be a life-like tooth that could last you for years to come.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Crowns Attach to Implants.”
Inauguration night is usually a lavish, Washington, D.C., affair with hundreds attending inaugural balls throughout the city. And when you're an A-List celebrity whose husband is a headliner at one of the events, it's sure to be a memorable night. As it was for super model Chrissy Teigen—but for a slightly different reason. During the festivities in January, Teigen lost a tooth.
Actually, it was a crown, but once she told a Twitter follower that she loved it “like he was a real tooth.” The incident happened while she was snacking on a Fruit Roll-Up (those sticky devils!), and for a while there, husband and performer John Legend had to yield center stage to the forlorn cap.
But here's something to consider: If not for the roll-up (and Teigen's tweets on the accident) all of us except Teigen, her dentist and her inner circle, would never have known she had a capped tooth. That's because today's porcelain crowns are altogether life-like. You don't have to sacrifice appearance to protect a tooth, especially one that's visible when you smile (in the “Smile Zone”).
It wasn't always like that. Although there have been tooth-colored materials for decades, they weren't as durable as the crown of choice for most of the 20th Century, one made of metal. But while gold or silver crowns held up well against the daily grind of biting forces, their metallic appearance was anything but tooth-like.
Later, dentists developed a hybrid of sorts—a metal crown fused within a tooth-colored porcelain shell. These PFM (porcelain-fused-to-metal) crowns offered both strength and a life-like appearance. They were so effective on both counts that PFMs were the most widely used crowns by dentists until the early 2000s.
But PFMs today make up only 40% of currently placed crowns, down from a high of 83% in 2005. What dethroned them? The all-ceramic porcelain crown—but composed of different materials from years past. Today's all-ceramic crowns are made of more durable materials like lithium disilicate or zirconium oxide (the strongest known porcelain) that make them nearly as strong as metal or PFM crowns.
What's more, coupled with advanced techniques to produce them, all-ceramic crowns are incredibly life-like. You may still need a traditional crown on a back tooth where biting forces are much higher and visibility isn't an issue. But for a tooth in the “Smile Zone”, an all-ceramic crown is more than suitable.
If you need a new crown (hopefully not by way of a sticky snack) or you want to upgrade your existing dental work, see us for a complete exam. A modern all-ceramic crown can protect your tooth and enhance your smile.
If you would like more information about crowns or other kinds of dental work, please contact us or schedule a consultation. To learn more, read the Dear Doctor magazine article “Porcelain Crowns & Veneers.”